Water Technology Systems Pty Ltd

Victoria, Australia

The wtscf systems are batch treatment system, meaning that they will treat a volume of water and then treat additional volumes one after another until the entire volume is treated. fully automated plc control with vfd controls for all motors. touch screen plc interface with manual operational control. earth net facility for over the net software operational monitoring. clay polymer dosing system using a hopper and level sensing device. the water is separated from the solids by filtering through a paper media on a roll mechanism. Other means of separationfiltration is achieved by use of a belt press or a filter press. stainless steel construction with filter belt and squeezer. 20 amp 415 volt 3 phase power with a neutral and earth terminating in an appropriate power outlet .

we are offering Wtsbcr Treatment Systems. The bio-chip reactor is an enhanced activated sludge process with the biomass attached onto a small bio-media that is suspended in the mixed liquor. The advantages of a suspended growth process and an attached growth process compared to a conventional activated sludge system is that the wtsbcr has the advantage of providing a greater biomass concentration, therefore increasing treatment capacity.

We are offering ozone polishing system. The filtration systems are a combination of various treatment media to suit the industrial waste water being treated. The system is flexible and modular. combination of activated carbon, multimedia and ion exchange. uv ozone. chlorine bromine facility available for disinfection. ro application can be added. Reduce water consumption. reduce sewer disposal costs. removes particulate particles. removes organic compounds. automatic operation plc & earth net facility. advance filtration. odormicrobial control.

The on board oil collection separation chamber receives skimmed oil from each skimmer in each coalescing section of the dual reverse lamella coalescer oil water separator. the passive skimmers will collect some water while skimming the surface. oil and water mixture is further separated in the collection chamber by gravity. water that sinks to the bottom of the chamber is decanted out of the chamber through the adjustable decant outlet. The adjustment is designed to allow for increased or decreased flow from the skimmers while maintaining a proper skimming level in the collectionseparation chamber. decanted water is sent back to the sump or to a drain system. the oil that collects in the chamber is skimmed from the chamber and sent to a collection drum supplied by the client.

Desalination and RO for treating high levels of salinity or treating sea water for industrial processing and potable water.

Specially formulated Clay Polymer is encapsulated in the vessel by use of multiple cartridges (pictured). These are used to remove traces of oil, hydrocarbons and mercury from process water on the oil and gas platform. The product range can treat arsenic, cyanide and other heavy metal products in the mining and industrial production phase.