Flow Meters #410733

We offer dmtfb wall mount clamp on ultrasonic flow meters. Features1. due to the non-invasive nature of the clamp-on technology, there is no pressure drop, no moving parts, no leakage, no risk of contamination and corrosion. 2. measurement is independent of fluid conductivity with wider applications than magnetic meters. 3. non-invasive, nema 4x (ip65) clamp-on transducer is easy to install and cost efficient. Since the transducers do not contact with the liquid, fouling and maintenance are eliminated. 4. parallel operation of positive, negative and net flow totalizers with multiplier, while the output of totalizer pulse or flow rate frequency output are transmitted via open collector terminal.

the centre-insertion series is an improved mode for standard insertion series. the centre-insertion transducer is easy to mount; two transducers are installed at the same side. one transducer is the same with standard insertion transducer, but the other transducer is always inserted into the centre point of pipe line, the insertion length varies with the pipe line diameter. in fact, the ultrasonic flight distance is half of the standard insertion mode. the difference in time of flight also is half of the standard insertion mode.

we are offering DMTFF Wall-mount Flanged Ultrasonic Flow Meters.Features1. Calibrated in manufacture's lab, field setup is unnecessary.2. Measurement is independent of fluid nature with wider applications than magnetic meters.3. Available including up to 8GB event data logger, can search the event of totalizer flow, flow rate, velocity etc.4. Parallel operation of positive, negative and net flow totalizer, while the output of totalizer pulse and frequency output are transmitted via open collector.5. Re-calibration or maintenance is easy, no processing interruption (just plug out the inserted transducers from pipe line, when re-calibration or maintenance is finished), can be hot-tapped.

we are offering Dmtfw-e Ultrasonic Heat Flow Meter.Features* Integral transmitter suitable for harsh environments.* High measurements precision, high accuracy 0.1 deg C* Low maintenance no moving parts or flow obstructions translates into long-term stability.* Very low minimum measurable flow velocity (0.003ms).* Self-adjusting transducer receiving circuit continually adapts for changing pipe parameters such as scaling or corrosion.* Fast response to flow transients, tracks flow rate changes better than electromagnetic meters.

We are offering dmdfc insertion doppler ultrasonic flow meter.Features: * the system can be field configured to pipe sizes ranging from 65 to 4000mm. * hot-tapped installation and demounted online, do not need to shut down the pipe flow when installing the transducers. * for dirty liquids, a certain amount of air bubbles or suspended solids contain * excellent low flow rate measurement ability, low to 0.05 ms * a wide range of flow measurement, high flow rate can reach 12ms * automatically signal gain adjustment * user-friendly configurations * 4-20ma, totalizer pulse and relay alarm output * accuracy: 2.0% calibrated span.

we are offering dmdfb clamp-on doppler ultrasonic flow meter.features * the system can be field configured to pipe sizes ranging from 15 to 4000mm. * for dirty liquids, a certain amount of air bubbles or suspended solids contain * excellent low flow rate measurement ability, low to 0.05ms * a wide range of flow measurement, high flow rate can reach 12ms * automatically signal gain adjustment * do not need to shut down the pipe flow when installing the transducers. * user-friendly configurations * 4-20ma, totalizer pulse and relay alarm output * accuracy: 2.0% calibrated span

we are offering dmdfp portable doppler ultrasonic flow meter.features * the system can be field configured to pipe sizes ranging from 15 to 4000mm. * for dirty liquids, a certain amount of air bubbles or suspended solids contain * excellent low flow rate measurement ability, low to 0.05 ms * a wide range of flow measurement, high flow rate can reach 12ms * automatically signal gain adjustment * do not need to shut down the pipe flow when installing the transducers. * user-friendly configurations * 4-20ma, totalizer pulse and relay alarm output.

We offer dmtfc wall mount insertion ultrasonic flow meters. Features: 1. hot-tapped installation, no pipe line flow interrupted. 2. internally configured batch controller makes batch control convenient and accurate. 3. spool-piece transducer for best accuracy (better than 1.0% read) and better long-term stability. 4. no moving parts, no pressure drop, no maintenance. 5. wide bi-directional flow range of 0 to 40 fts (0 to 12 ms), totalizer for net, positive and negative flow display.one meter suitable for a wide range of pipe sizes from dn65 to dn4500(mm). 6. signal quality tracking and self-adjusting functions.

We offer dmtfh handheld ultrasonic flow meters. Features 1. carefully designed so that is very compact and ease to use. 2. principle of transit time and multipulsetm technology. 3. can be used for mobile measurement, flow rate calibration, data comparing, meters running status checking. 4. a variety of liquid applications can be accommodated: ultra-pure liquids, potable water, chemicals, raw sewage, reclaimed water, cooling water, river water, plant effluent, etc. 5. data logger functions. The capacity is based on users choice, and the maximum can reach 8gb. Users can store 5 years

We offer dmhf ultrasonic heat flow meter. features 1. For transmitter, users can select fixed types or portable types. 2. For transducer, non-invasive clamp-on and insertion type are available. 3. For temperature sensor, utilize pt1000 with 0.1%, clamp-on and the insertion type are available. 4. Internally configured batch controller makes batch control convenient and accurate. 5. No moving parts, no pressure drop, no need of maintenance. 6. Easy and economical installation, hot-tapped installation. 7. Daily, monthly and yearly totalized flow: totalized flow for the last 64 days and months as well as for the last 5 years can be reviewed. 8. Optional sd card data logger output, can memory total heat flow, heat flow rate, etc.

we are offering Dmtfp Portable Ultrasonic Flow Meters.Features: 1. Advanced DSP and MultiPulse Technology. 2. 40-hour battery (rechargeable), back-lit 4 lines display all integrated into a rugged, watertight enclosure. 3. Cost-effective and versatile, Providing SD card data logger function, can search the event of totalized flow, flow rate, velocity etc. The SD card capacity is based on users choice and the maximum can reach 8GB. 4. Works reliably in both clean and somewhat dirty liquids. 5. Lightweight and easily transportable in box.

we are offering DMTF-Ex Transit Time Ultrasonic Flow Meter.Features Transit Time Ultrasonic Flow Meter * Non-invasive explosion-proof clamp-on and insertion transducers * Bi-directional flow measurement * Able to measure positive, negative and net total flow * Standard type and Explosion-Proof type are available * Can measure pipe sizes from DN50-4500 * Measurable temperature range: -40* 250* * Easy operation and quick installation

We are offering dmtf-ex doppler ultrasonic flow meter.Features 1. The system can be field configured to pipe sizes ranging from 40 to 4000mm. 2. For dirty liquids, a certain amount of air bubbles or suspended solids contain 3. Excellent low flow rate measurement ability, low to 0.05 ms 4. A wide range of flow measurement, high flow rate can reach 12ms 5. Automatically signal gain adjustment 6. Do not need to shut down the pipe flow when installing the transducers. 7. User-friendly configurations