Nu-Look Aluminium Windows & Doors

We offer residential sliding window. Key features

50mm frame, high performance residential sliding window

can be re-handed after installation

opening sashes run on large diameter wheels ensuring smooth operation

standard cam and key type cam handles available and located on the jamb for maximum security

can be fabricated as four light sliders, sliders over sliders and fixed lights out of slider frame

fixed sill has built-in drainage to take care of condensation

We offer residential awning window. Key features

successfully tested to comply with australian standard as 2047

optional mullion strengths cover a large variety of design wind load areas

continuous hinge hood protects the top of the sash from water intrusion

water resistance rating of 450pa allows this awning window to be used in most exposed residential locations in australia

awning type sashes are fitted with heavy-duty chain winders. Our manual chain winder is illustrated on the back page along with the relevant features

casement type sash option available. These sashes are fitted with stainless steel friction stays and wedge-less cam handles. (without fly screens)

We offer commercial awning window. Key features

residential awning sashes inlaid directly into commercial framing

dedicated head and sill to accept awning sashes with manual chain winders with standard 30mm left or alternative 44mm nailing fin jambs

44mm nailing fin frame for those projects with double glazed fixed lights

complies with as2047, with a high water resistance of 450 pa with a very low air infiltration that makes this product suitable for air-conditioned buildings

awning sashes can be fitted with concealed electric chain winder, manual chain winder or cam handles

fly screens can be fitted behind awning sashes with winders

fixed lowlights can be glazed from the inside in elevated situations by reversing the removable glazing beads

We are offering thermalheart awning window.
Key features

thermalheart windows and doors have been designed in australia to suit local building techniques. Nailing fins (flashing fins), building-in lugs and the pvc sill flap are all designed in to make it easier for your builder. Many imported windows have been designed for overseas conditions and dont necessarily suit australian building practices.

series 726 incorporates thermalheart technology giving a true wide thermal break between the outside and inside faces. Wers (window energy rating system) data shows that using the same igu (insulated glass unit) in a thermalheart awning window is 32% more efficient than a standard non-thermally broken window.

a major advantage with thermalheart in cold climates is the reduction in internal condensation.

thermalheart is also suitable for hot climates providing extra insulation to reduce requirements for home cooling.

the extra strong sash allows large sash windows to be fabricated for high wind load areas.

the bold clean frame gives a contemporary appearance with sharp square external glazing beads standard.

We offer architectural sliding window. Key features

102mm wide perimeter frame with built-in nailing fins designed to simplify installation into brick veneer and cavity brick

the extra strong sashes allow large sash windows to be fabricated for high wind load areas

double sash design with the external sash fixed

both fixed and opening sashes can be installed, replaced andor re-glazed from inside the building

sliders can be fitted with surface or mortice deadlocks

sashes run on heavy-duty wheel carriages

We offer commercial sliding window. Key features

the 17mm thick sliding window sashes have been fitted into centre glaze commercial framing using custom head and sill and an inlay adaptor that snaps into centre glaze frame

double sash design with the external sash fixed

both fixed and opening sashes can be installed, replaced andor re-glazed from inside the building which could be an important feature in elevated situations

there is a large variety of window combinations possible (sf, fs, sfs or fssf) with and without highlights and lowlights

102mm x 44mm head, sill and jamb, 44mm mullion and 44mm transom match centre glaze commercial framing

sliding sashes can be fitted with a variety of latches and locks including centre multi point lock

Key Features

This high-performance awning and casement window has been designed to accept Truth Hardware. This allows us to offer very large casements and awnings fitted with scissor type winders with jamb to stile latches that secure the sashes in the closed position.

The extra strong sashes allow large sash windows to be fabricated for high wind load areas

Successfully tested to resist 450Pa water

Fixed sidelightslowlights and highlights can be single or double glazed
The perimeter frame has been designed to make installation into brick veneer and cavity brick easier with built-in nailing fins (weather bars). The sub-sill that comes with this window also has a built-in nailing fin

The Truth hardware can resist very high negative wind loads with the use of winders and side latches

Series 467 accepts fly screens that tuck into head and sill recess

We offer commercial double hung window. Key features

vertical sliding double-hung sashes inlaid directly into commercial framing

fly screens tuck into dedicated recess in the jamb inlay adaptor, supported with concealed nylon clips

sashes will bypass each other to allow cleaning of all glass from inside the building

custom heavy-duty key-lockable catch with die-cast keeper

standard 30mm nailing fin jamb as illustrated left or alternative 44mm wide jamb

fixed lowlights can be glazed from the inside in elevated situations by reversing the removable glazing beads and fitting a custom captive wedge to the outside