SealTick - Bestech Australia Division

Dingley, Australia

The TSE6084 tests Cans for leaks using a vacuum-decay method, and gives go no-go answers independent of the operator. It can find holes as small as 15 micron in diameter. It can test Cylindrical Cans made from Tin, Cardboard, or Composite materials (a combination of paper, plastic and metal). It minimizes stress to the Can and maximizes sensitivity by using a close-fitting chamber. This ensures packages are left in original condition after testing, and can be put straight back onto the production line, in-turn decreasing return-on-investment time. It requires packages with a head-space of air (or gas), and generally dry contents. Items are placed manually, and the Lid is slid-closed to initiate a fully automatic test sequence. Results are displayed with Pass or Fail lamps, along with a quantitative measure of the leakage rate. Sensitive leak measurement without minimal stress to packaging Simple operation Test initiates from sliding-Lid closure Accepts multiple can sizes through the use of fill-in discs and cylinders Rapid testing from 5-15s Internal generation of test vacuum from compressed air or optionally by External Vacuum Pump Results are logged into a spreadsheet importable format for trend analysis and traceability Internal web-page for up-to-the-minute status Stainless Steel construction

The Seal Tick TSE6089L is a new product developed specially for testing seals in larger food packages. A horizontal test bed ensures very large packages such as Pet Foods, can be easily lifted into and out of position. Many products need to be checked to ensure the package is sealed against moisture, oxygen or biological contamination. It ensures the seals have been made completely, allowing the manufacturer to be confident about the shelf life and integrity of their product, whilst offering a system of quality traceability. Features:Accepts a wide range of pack sizes and shapes without adjustment.Testing times from 20-40 seconds .Simple operation - test initiates from handle closureTest results shown on lamps:Quantitative result on backlit display.20 nameable methods. User programmable to optimize for different sized products.Memory - 30 days of results (1 file per day). On the 31st day, the first days results are cleared. 30 days of tracking the test counters progress (1 file per 10 days). On the 31st day the first 10 days are cleared.Ethernet connection allows periodic upload for mandatory record keeping and trend identification, plus online monitoring via Web Browser.Test parameters stored and accessible under password access.Setting and control of test times and parameters from keyboard.Internal generation of test vacuum from compressed air.High resolution measurement of leak rate.Recall of most recent test data to review test parametersCalibration menus for vacuum.Stainless steel construction.Accepts items up to 700x500 mm (depending on thickness), and up to 20Kg. Options:Vacuum pump for air supply independence.Power input 115V or 230V AC.USB connection for log retrieval.

The tse2032 locates gas-leaks in a package by submerging it in water and then applying a vacuum. A stream of bubbles emanates from any leakage point. An operator places the package on the water surface and closes the lid. A grid integrated in the lid pushes the sample below the surface. The air-supply lever then turns on the vacuum, and some slight pressure on the lid initiates the test. Once the leak has been identified, or the package passed, turning off the air-supply lever rapidly removes the vacuum and the lid pops-open. made from transparent acrylicsimple test initiationobserve vacuum applied on a digital vacuum gaugevary the vacuum generated with regulator knob, and hence the force applied to the packageoh&s - lift-assisted lid reduces operator fatigueo-ring recessed into lid to reduce wear-and-tearoh&s - drain valve minimizes lifting while full of waterscrew-reinforced construction for years of trouble-free use